Before applying the waterproof sealer to the surface of the Lake Forest pool, home owners need to drain the pool and give it an acid wash. Next home owners need to mix the water seal proofer to the surface of the pool. The material needs to be mixed following the manufacturers instructions. Before applying the material to the surface of the Lake Forest pool, home owners need to start at the shallow end and work towards the main drain. Home owners need to make sure that they do not let the edge dry very fast.

Home owners who have no skill in painting or no prior experience in painting should remember to keep the brush strokes going in the same direction on the floor of the Lake Forest pool and horizontally on the walls. Owners of a Lake Forest pool may need to bail out water near the main drain first before staring their work. Once the sealant has dried completely, owners of a Lake Forest pool need to start filling the pool as soon as possible by putting the water hose into the main drain. The new seal on the surface of the pool should last for a few years. The advantage of applying a sealant to the pool is that it will help keep the surface of the Lake Forest pool looking fresh and new.

Gunite pools are expensive to install as ground has to be excavated to make place for it. However, they are also the easiest pools to customize. Some home owners seal the concrete on the surface of the pool every alternative year. This prevents cracks from developing on the surface o the Lake Forest pool.